Skip to content
High Tide InspectionsHigh Tide Inspections
A newly built Florida stucco home with a paver driveway

Atlantic Beach · Duval County

New Construction Inspections in Atlantic Beach, FL

Independent phase inspections on a builder's home — pre-drywall, final walkthrough and the 11-month warranty inspection — performed for you, not for the builder. We inspect your Atlantic Beach home and email a detailed photo report.

Mon–Sat 8am–6pm · InterNACHI certified, Florida licensed and insured · 20+ years construction and renovation experience

A new construction inspection in Atlantic Beach covers framing and structural detail before drywall, mechanical rough-ins, and then the finished work against the builder's own standard at final walkthrough. It takes one to three hours per phase and produces a phase report you can hand the builder as a punch list. Typical cost runs $300–$675 per phase visit. This is one of the inspections Atlantic Beach owners request most, usually because an insurer or a closing date is driving the timeline.

Typical cost
$300–$675per phase visit
Building stock
Coastal barrier
Permitting
Duval County

New Construction Inspections in Atlantic Beach

Atlantic Beach has the oldest and most interesting housing of the three Duval beach towns — small 1930s and 1940s cottages in the Old Atlantic Beach grid under a mature oak canopy, mid-century ranches in Selva Marina, and a growing number of large rebuilds. The canopy is beautiful and it is also an inspection issue: shaded roofs hold moisture, and mature oaks put branches and root systems where they cause problems. Every new construction inspection we run in Atlantic Beach is filtered through the same local reality: salt air, wind-borne debris exposure and the moisture detailing that coastal walls live or die on. We are InterNACHI certified, Florida licensed and insured, and we inspect every Atlantic Beach home to the same standard.

Old Atlantic Beach cottages routinely still have original or partially updated systems behind a nice remodel — cloth-insulated branch circuits, galvanized supply, and cast-iron drains. We open panels and look at terminations rather than trusting the age of the cover. Shaded roofs under oak canopy grow algae and hold moisture, which shortens shingle life and rots decking at valleys and low-slope tie-ins, so we check decking condition from the attic side. Marsh-front homes on the Intracoastal side get the same salt corrosion review as oceanfront — the aerosol reaches them — plus a look at any dock, bulkhead, or elevated deck framing. On a new construction inspections specifically, that means concentrating on framing and structural detail before drywall, mechanical rough-ins, and then the finished work against the builder's own standard at final walkthrough.

What we run into repeatedly in Atlantic Beach

Storm surge and dune erosion define the ocean side, and the marsh side floods from the Intracoastal and the tidal creeks feeding Dutton and Tideviews. Atlantic Beach permits separately from the City of Jacksonville and enforces a tree protection ordinance that affects what a buyer can do with a lot after closing — worth understanding before you plan an addition or a pool. Insurance is the practical squeeze: roof age past twenty on the island triggers non-renewal pressure, and mid-century houses that have never been re-nailed at the roof deck score poorly on the wind mitigation form. Across Old Atlantic Beach, Selva Marina and Ocean Walk, these are the patterns that repeat.

Neighborhoods and landmarks

We inspect throughout Atlantic Beach, including the areas around Beaches Town Center, Dutton Island Preserve, Tideviews Preserve, Naval Station Mayport, Intracoastal Waterway. Median stock here runs 1930s–1960s in Old Atlantic Beach, 1960s–1980s in Selva Marina and Royal Palms, with steady modern infill and rebuild.

  • Old Atlantic Beach
  • Selva Marina
  • Ocean Walk
  • Royal Palms
  • Atlantic Beach Country Club
  • Seminole Beach

Coastal and barrier-island building stock in Atlantic Beach

On a barrier island, the ocean is a testing lab running twenty-four hours a day. Salt aerosol carries several blocks inland and it attacks anything metal — condenser coils, fasteners, panel bus bars, hurricane connectors, railing anchors. A heat pump that lasts fifteen years three miles inland routinely gives out at eight to ten on the beach. On top of that, most of this area sits inside the Florida Building Code wind-borne debris region, so opening protection is not optional on new work and its presence or absence is one of the largest single line items on a wind mitigation report. The two questions we answer on every island inspection are: what is the true remaining life on the metal systems, and can this envelope actually be documented for insurance? Both change the number a buyer should be willing to pay.

What this building stock produces on a new construction inspections

  • Corroded HVAC condenser coils, fan cages, and disconnect boxes — often at half of expected service life
  • Rusted roof and wall fasteners, hurricane straps, and lintels showing rust-jacking through stucco
  • Stucco-over-block cracking at corners and openings, with moisture intrusion behind the coating
  • Missing, undocumented, or non-code-compliant opening protection in the wind-borne debris region
  • Roof edge and drip edge detailing that will not hold in uplift, and lifted or creased shingle tabs
  • Elevated foundations with corroded connectors, deteriorated pile jackets, or enclosed below-BFE space
  • Salt-corroded electrical panels, breakers, and exterior receptacles on the ocean side of the house
  • Deck, balcony, and railing attachments with rusted or undersized anchors

When to book new construction inspections

If one of these applies to the Atlantic Beach property you are looking at, this is the inspection to order.

  • Your home is framed and the drywall crew is scheduled — you have days, not weeks, to see behind the walls
  • The builder told you a third-party inspection 'isn't necessary because the county inspects'
  • You are approaching your closing walkthrough and the punch list is being written by the builder's own rep
  • Month 10 of your one-year builder warranty is here and you have not had it independently inspected
  • The subdivision went up fast with rotating subcontractor crews
  • You noticed nail pops, sticking doors, or hairline cracks that appeared in the first few months
  • Your HVAC seems to run constantly or certain rooms never cool the same as others
  • There is standing water near the foundation or the grading slopes back toward the slab

Need new construction inspections in Atlantic Beach?

Call 904-806-7679 and you get William Knight directly — the same person who will be on your roof and in your attic, and who writes the report afterward.

Mon–Sat 8am–6pm · 20+ years construction and renovation experience · InterNACHI certified, licensed and insured

What new construction inspections covers

Buying new does not mean buying defect-free. A house is assembled by a rotating sequence of subcontractors working against a schedule, inspected by a municipal building official against life-safety code rather than against workmanship, and handed over during a walkthrough that mostly catches paint scuffs and a sticking door. Independent inspection on a new build is not an accusation against the builder. It is a second set of eyes at the moments when problems are still cheap to fix. The best builders in Northeast Florida have no issue with it; some will even tell you which phase they would want inspected if it were their money. A builder who refuses to allow any third-party inspection has told you something useful.

The pre-drywall phase inspection is the one that cannot be replicated later, and it is the reason to engage an inspector early rather than at closing. Once drywall goes up, the framing, the structural connectors, the plumbing rough-in, the electrical rough-in, the HVAC duct runs, the fire blocking, the window and door flashing details, and the weather-resistive barrier all disappear behind a finished surface for the life of the house. This is the window to catch cut or notched structural members, missing or under-nailed hurricane connectors, ducts crushed against framing, drain lines with insufficient fall, plumbing penetrations left unsealed, and window flashing installed out of sequence so it directs water into the wall rather than out of it. Timing is tight. It happens between rough-in approval and insulation, usually a matter of days.

The final or pre-closing inspection is a full home inspection performed on a finished house, and it produces a punch list with photographs that you can hand to the builder before you sign. Typical findings on new construction in this region: HVAC systems that never got a proper airflow balance so the back bedrooms run five degrees warm, condensate lines run without adequate fall or without a float switch, bath fans terminating into the attic instead of through the roof, missing attic insulation over the garage ceiling or at the attic access hatch, reversed polarity and missing GFCI or AFCI protection at specific circuits, roof flashings and kick-outs omitted at wall junctions, grading that slopes toward the slab, and irrigation heads spraying directly onto stucco.

Then there is the inspection almost nobody books, and it is the most valuable one on the list. Most builder warranties are tiered: roughly one year on workmanship and materials, two years on the electrical, plumbing, and HVAC distribution systems, and ten years on major structural defects. The one-year workmanship coverage is the broad one, and it is the one that expires while you are still unpacking. An inspection at the eleven-month mark, scheduled with at least three to four weeks left before the anniversary date, gives you time to submit a documented claim list while the builder is still obligated to correct at no cost. Read your specific warranty document first, because terms and claim procedures vary by builder.

What an eleven-month inspection finds is different from what the final walkthrough found, because the house has now been through a full Florida seasonal cycle. Materials have moved. Settlement has occurred. The slab has cured. The HVAC has run through a full summer at design load. Typical findings: drywall cracking at corners and above openings, nail pops, doors that no longer latch as framing shrank, grout and caulk failures at tub and shower junctions, exterior stucco cracking at control joints and window corners, roof shingle sealant that never bonded, condensate drainage problems that only show under sustained load, water heater and expansion tank issues, and grading and drainage failures that only appear after the landscaping has settled and the first heavy rain season has passed.

Practically, book the pre-drywall phase as soon as you have a framing completion date, and ask your builder's superintendent to notify you when rough-in inspections are approved so the visit lands in the right window. Book the final for a few days before your scheduled closing, not the morning of, so there is time for the builder to correct items. Book the warranty inspection at month ten to eleven and put the date in your calendar the day you close, because it is the single easiest inspection to forget and the one that costs the most to miss. Reports on all three come with photographs and are written so they can be handed directly to a builder's warranty department without translation.

How the inspection runs, step by step

  1. Pre-drywall inspection

    Scheduled after framing, rough electrical, rough plumbing and mechanical rough-in but before insulation and drywall. We document framing and truss connections, hurricane strapping and roof-to-wall hardware, notched or drilled structural members, plumbing supply and drain runs, ducts, window and door flashing, and the weather-resistive barrier. This is the only day these things are ever visible.

  2. Pre-closing / final walkthrough inspection

    Done shortly before your walkthrough with the builder. Full systems check — HVAC temperature split, every receptacle and GFCI, every window and door, grading and drainage, roof and flashing, attic insulation coverage and depth, appliances and fixtures — plus the cosmetic punch items builders routinely miss.

  3. Documented punch list you can hand over

    You get a photographed, itemized list organized so the builder's warranty department can act on it. Location, photo, description. Vague complaints get argued; documented items get fixed.

  4. 11-month warranty inspection

    Scheduled in month 10 or 11 of a standard one-year builder warranty, deliberately early enough that you can submit claims before it expires. By this point the house has been through a full Florida summer and a settling cycle, and the defects that were invisible at closing have surfaced.

  5. Report emailed with photos and priorities

    PDF by email, same day or next morning, separated into warranty-claimable defects and normal owner maintenance so you are not burning credibility with the builder on items they'll rightly decline.

  6. Follow-up verification if you want it

    After the builder completes warranty work, we can return and confirm the items were actually corrected rather than closed out on paper.

Plan on one to three hours per phase. The report is a phase report you can hand the builder as a punch list, which matters when scheduled at pre-drywall and again before closing, and again before the one-year warranty expires. Same-week appointments are usually available across Atlantic Beach and the surrounding Duval County.

New Construction Inspections cost in Atlantic Beach

A new construction inspection in Atlantic Beach typically runs $300–$675 per phase visit. Where a specific job lands depends on which phase — pre-drywall, pre-closing and 11-month are each priced separately, square footage and number of stories and whether you book multiple phases together, which is priced better than one-offs. We quote before we schedule, not after — you will know the number before the appointment goes on the calendar. Call 904-806-7679 and we can usually give you a figure on the phone.

Typical Northeast Florida range

$300–$675 per phase visit

What moves an inspection within that range:

  • Which phase — pre-drywall, pre-closing and 11-month are each priced separately
  • Square footage and number of stories
  • Whether you book multiple phases together, which is priced better than one-offs
  • Travel to outlying subdivisions in Nocatee, Middleburg, Palm Coast and similar growth corridors
  • Site access and scheduling constraints when the builder controls the calendar
  • Optional return visit to verify completed warranty repairs

That is a typical range, not a quote. Call 904-806-7679 for a firm price on your address.

Duval County: permitting, wind, flood and insurance

Permit records for Atlantic Beach are held by City of Jacksonville Building Inspection Division (the Beaches cities and Baldwin run their own building departments).

Most of Duval County permits through the City of Jacksonville Building Inspection Division under the consolidated city-county government, but Jacksonville Beach, Neptune Beach, Atlantic Beach, and Baldwin maintain their own building departments — so a permit search has to be run against the right jurisdiction. Re-roofs, window and door replacements, HVAC and water heater changeouts, panel upgrades, additions, and enclosures all require permits. In older Jacksonville neighborhoods we regularly find converted garages, enclosed carports, and finished attics with no permit record. That is not automatically a deal-killer, but it is a real question for the buyer and for the next carrier. Permit history for this work is held by City of Jacksonville Building Inspection Division (the Beaches cities and Baldwin run their own building departments), and on a new construction inspection that record is often the fastest way to date what you are looking at.

Duval County is one of the few places in Florida where the wind speed line is written into local ordinance rather than read off a map. For Risk Category II buildings, the ultimate design wind speed is 130 mph east of a demarcation line that runs up the middle of the St. Johns River to I-95 at the Fuller Warren Bridge and then north along I-95 to the county line, and 125 mph west of it. Two houses a few blocks apart can be designed to different numbers. The Florida Building Code puts a site in the wind-borne debris region when it is within one mile of the coastal mean high water line with Vult of 130 mph or greater, or anywhere Vult reaches 140 mph. In Duval that captures Jacksonville Beach, Neptune Beach, Atlantic Beach, and the oceanfront strip — where impact glazing or approved shutters are required on all openings. Most of inland Jacksonville falls outside it, which is exactly why so many mainland homes have unprotected openings and lose the opening-protection credit on a wind mitigation report.

Duval's flood story is river-driven as much as ocean-driven. The St. Johns backs up on a strong onshore wind, and the tidal creeks — Trout River, Cedar, Ortega, Pottsburg — flood neighborhoods well inland of the beach. San Marco, Riverside, and the Northside creek corridors all carry AE zone areas, and a good deal of that housing was built before flood mapping existed.

Insurers writing in Duval commonly ask for a 4-point inspection — roof, electrical, plumbing, HVAC. Requirements vary by carrier, so confirm with your insurance agent, your realtor, or your lender whether a 4-point is needed — we can include it with your inspection. Jacksonville's older housing stock trips 4-point underwriting rules constantly: cast-iron drain lines, polybutylene supply, aluminum branch wiring, and Federal Pacific or Zinsco panels are all common declines. A wind mitigation report on form OIR-B1-1802 documents roof shape, roof deck attachment, roof-to-wall connection, roof covering compliance, secondary water resistance, and opening protection. Roof deck nailing and roof-to-wall straps are usually where a Jacksonville house wins or loses credits. That is the backdrop every new construction inspections in Atlantic Beach lands against.

Why this is worth doing properly

  • Framing, strapping, flashing and rough-ins get looked at while they are still visible and cheap to fix
  • Your punch list is written by someone with no relationship to the builder
  • The 11-month inspection catches settling, HVAC and drainage defects while the builder still owes you the repair
  • Photographed documentation makes warranty claims far harder to dismiss
  • You learn your new house — shutoffs, panel, equipment, filter sizes — from someone explaining it plainly

What Northeast Florida clients say

Published on the High Tide Inspections Google Business Profile.

  • William was professional and thorough. He was able to schedule the appointment within the timeline I needed and delivered the wind mitigation inspection report that same day. I would recommend High Tide Inspections for anyone needing his services.

    D Rappvia Google ·
  • William was extremely professional and thorough throughout the entire process. He was able to schedule the appointment within the timeline I needed and delivered both the 4-Point and full home inspection reports the following day.

    Excerpt — Google truncates longer reviews in its listing. Read the full review on Google (opens in a new tab).

    Christa Teddervia Google ·
  • As a Realtor, I really appreciated how thorough and professional High Tide Inspections was during this new construction inspection. William provided a detailed, easy-to-read report with great photos and clear explanations.

    Excerpt — Google truncates longer reviews in its listing. Read the full review on Google (opens in a new tab).

    Coral Babb · Realtorvia Google ·

Reviews are published on the High Tide Inspections Google Business Profile and are reproduced here word for word. Rating and review count verified 2026-08-17.

New Construction Inspections in Atlantic Beach: common questions

How much does a new construction inspections cost in Atlantic Beach?

Typically $300–$675 per phase visit in Atlantic Beach. The variables are which phase — pre-drywall, pre-closing and 11-month are each priced separately, square footage and number of stories and whether you book multiple phases together, which is priced better than one-offs. Because Atlantic Beach is coastal and barrier-island building stock, age and size of the home move the number more than anything else does. Call 904-806-7679 for a firm number before you book.

How long does a new construction inspections take in Atlantic Beach?

One to three hours per phase. You get a phase report you can hand the builder as a punch list. We schedule across Atlantic Beach and the rest of Duval County, and same-week appointments are normally available.

What does a new construction inspections find in Atlantic Beach homes?

On a barrier island, the ocean is a testing lab running twenty-four hours a day. The findings that repeat here are corroded hvac condenser coils, fan cages, and disconnect boxes — often at half of expected service life, rusted roof and wall fasteners, hurricane straps, and lintels showing rust-jacking through stucco, stucco-over-block cracking at corners and openings, with moisture intrusion behind the coating and missing, undocumented, or non-code-compliant opening protection in the wind-borne debris region. Old Atlantic Beach cottages routinely still have original or partially updated systems behind a nice remodel — cloth-insulated branch circuits, galvanized supply, and cast-iron drains.

Do I need a permit record for work found during a new construction inspections in Atlantic Beach?

Permit history in Duval County is held by City of Jacksonville Building Inspection Division (the Beaches cities and Baldwin run their own building departments). An inspection tells you what condition something is in; the permit record tells you whether it was ever inspected by the jurisdiction. On additions, re-roofs, electrical upgrades and enclosed porches, checking both is worth the hour it takes.

Who performs the new construction inspections in Atlantic Beach?

High Tide Inspections. We are InterNACHI certified, Florida licensed and insured, Certified Wind Mitigation Inspectors, Certified Roof Inspectors and 4-point certified, with 20+ years of construction and renovation experience behind the report. Call 904-806-7679.

Why inspect a brand new home that already passed county inspection?

Because a municipal inspection verifies minimum code compliance on specific items, often in a matter of minutes, and it does not evaluate workmanship, installation quality, or whether the system will actually perform. New homes routinely have missing insulation, disconnected or crushed ducts, improper flashing, uncorrected framing cuts and drainage that slopes the wrong way. None of that fails a code inspection.

How much does a new construction inspection cost?

Typically $300 to $675 per phase visit in Northeast Florida, driven mostly by square footage. Booking pre-drywall and pre-closing together is priced better than two separate calls. Ask about the package when you call 904-806-7679.

When exactly should I schedule the pre-drywall inspection?

After framing, roof dry-in, and rough electrical, plumbing and mechanical are complete, but before insulation goes in. That window is often only a few days long. Ask your superintendent for the drywall date the week framing finishes, and call as soon as you have it.

Can my builder refuse to let a third-party inspector on site?

Some builders push back or require you to be present, and a few restrict site access for liability reasons during active construction. Most in Northeast Florida will accommodate a scheduled inspection. Read your purchase agreement early — if there is a restriction, you want to know in month one, not the week drywall goes up.

What is an 11-month warranty inspection and why that month?

Most builder warranties on workmanship run one year from closing. Inspecting in month 10 or 11 gives you time to write up findings and submit a claim before the warranty expires. Inspect at month 12 and you have documentation for a warranty you no longer have.

Who does the work

When you call 904-806-7679 you are talking to the lead inspector, and when the report arrives it was written by the person who was standing in the attic.

William Knight, owner and chief inspector of High Tide Inspections

William KnightOwner & Lead Inspector

Serving Northeast Florida from St. Augustine. Monday–Saturday, 8:00am–6:00pm.

  • InterNACHI Certified Professional Inspector
  • Certified Wind Mitigation Inspector
  • Certified Roof Inspector
  • InterNACHI Certified Four Point Inspector

Experienced inspectors, start to finish

The person who looks at the roof is the person who writes the report, and you can call and talk it through with us afterwards. Every inspection follows the InterNACHI Standards of Practice, so you know exactly what is covered.

InterNACHI certified, Florida licensed, insured

Certified Wind Mitigation Inspector and Certified Roof Inspector as well, which is what lets a single visit cover both the buyer's questions and the insurance carrier's forms.

20+ years construction and renovation experience

Two decades of building and renovating homes before inspecting them. That is the difference between noting a crack and telling you whether it matters, what caused it, and roughly what it takes to put right.

A detailed photo report, emailed quickly

Every finding is photographed and explained in plain language, organised so you can hand it straight to your agent, your carrier, or a contractor for pricing. No padding, no scare tactics, no upsell.

Schedule new construction inspections in Atlantic Beach

Tell us the address and your closing date and we will give you a firm price and the first date we can be there.

Mon–Sat 8am–6pm · 20+ years construction and renovation experience · InterNACHI certified, licensed and insured

904-806-7679Request Inspection