Palm trees bending in high wind and storm surge along a Florida coastline

Palm Coast · Flagler County

Wind Mitigation Inspections in Palm Coast, FL

The Florida OIR-B1-1802 Uniform Mitigation Verification Inspection — documenting the seven construction features carriers use to apply windstorm premium credits. We inspect your Palm Coast home and email a detailed photo report.

Call 904-806-7679 Request an Inspection

Mon–Sat 8am–6pm · InterNACHI certified, Florida licensed and insured · 20+ years construction and renovation experience

A wind mitigation inspection in Palm Coast covers roof covering and its permit date, roof deck attachment, roof-to-wall connections, roof geometry, secondary water resistance and opening protection. It takes thirty to sixty minutes, including attic access and produces the completed Florida OIR-B1-1802 form your insurer needs on file. Typical cost runs $100–$225 per inspection. Demand for this one in Palm Coast runs on the insurance calendar as much as the real estate calendar.

Typical cost: $100–$225per inspection
Building stock: Block & stucco
Permitting: Flagler County

Wind Mitigation Inspections in Palm Coast

Palm Coast is the clearest example in Northeast Florida of a market defined by timing. ITT platted the lettered sections starting in the late 1960s, and the original block-and-stucco homes went up through the seventies and eighties. Those houses are structurally fine and their attached systems are all expired at once. Then a second enormous wave came 1998 to 2007 and that stock is now hitting the same wall. The inspection here is about knowing which wave you are buying. In Palm Coast, wind mitigation inspection findings follow the building stock: concrete block and stucco construction under heavy storm exposure, much of it still carrying original roofing. We are InterNACHI certified, Florida licensed and insured, and we inspect every Palm Coast home to the same standard.

Roof first, every time. Original ITT-era homes are frequently on their first or second roof and past twenty years, which is where insurance denials start. We check covering condition, permit date, and where accessible the deck attachment, because a re-nail during a re-roof is worth real money on the wind mitigation form. Then stucco and lintels: block homes crack at control joints and corners, and rust-jacking at corroded lintel steel is common near the water. Panels include obsolete brands in the older sections. HVAC at twenty-plus with duct board plenums degrading in the attic is routine. On C and F section canal lots, the seawall gets a hard look. On a wind mitigation inspections specifically, that means concentrating on roof covering and its permit date, roof deck attachment, roof-to-wall connections, roof geometry, secondary water resistance and opening protection.

What we run into repeatedly in Palm Coast

The lettered sections are not interchangeable, and buyers treat them as if they are. C and F sections put you on saltwater canals with Intracoastal access — which means seawall condition, tidal flood exposure, and salt corrosion on mechanical equipment. Inland sections have none of that but often have well or septic on outlying lots and drainage swales that were never maintained. The county-wide challenge is insurance: with a huge share of the housing now aging and almost no opening protection outside the beach strip, 4-point inspections come up constantly and roof age drives whether a policy gets written at all. Requirements vary by carrier, so ask your insurance agent, your realtor, or your lender whether a 4-point is needed — we can include it with your inspection. Across Palm Harbor (F Section), Indian Trails (B Section) and Cypress Knoll (E Section), these are the patterns that repeat.

Neighborhoods and landmarks

We inspect throughout Palm Coast, including the areas around Intracoastal Waterway, Washington Oaks Gardens State Park, Graham Swamp Conservation Area, Palm Coast saltwater canal system, European Village. Median stock here runs Original ITT-era homes from the late 1970s and 1980s, a large 1998–2007 build wave, and post-2015 infill on the remaining platted lots.

Palm Harbor (F Section)
Indian Trails (B Section)
Cypress Knoll (E Section)
Belle Terre (P Section)
Pine Grove (P Section)
Grand Haven
Seminole Woods
Matanzas Woods

Book a Palm Coast inspection

Calling is fastest — Mon–Sat 8am–6pm.

Call 904-806-7679

Your name

Phone

Where the inspection report will be sent.

Property address

City or area

Inspection type

Preferred date (optional)

Monday–Saturday, 8:00am–6:00pm. Tell us the date you need and we will work to it where we can.

Anything we should know (optional)

Age of the home, square footage, and your closing date all help us quote accurately.

Or call 904-806-7679 — usually faster

Your details go straight to High Tide Inspections and are used only to schedule and price your inspection. They are never sold or passed to anyone else. See our privacy policy.

Concrete block and stucco, high storm exposure in Palm Coast

Block-and-stucco holds up structurally far better than frame in a storm, and that fact quietly hides the real risk: everything attached to the block is what fails. Roof coverings, windows, soffit, lanai screens, HVAC, and the electrical service all age on a normal schedule while the walls look permanent. The specific issue in this market is that a very large share of the housing was built in a compressed window, so an entire street can be at the same replacement point simultaneously — and insurers know it. When we inspect here, roof age and documentation come first, because that one item drives whether a policy gets written at all. After that, it is stucco and lintel condition, the panel, the HVAC, and on canal lots the seawall, which almost nobody looks at and which is the most expensive thing on the property to fix.

What this building stock produces on a wind mitigation inspections

Original or first-replacement roofs past twenty years, a frequent trigger for insurance non-renewal
Stucco cracking at block control joints, corners, and lintels, with rust-jacking where lintel steel is corroding
Aging electrical panels including obsolete brands, and undersized services on homes that added a pool or shop
Lanai and porch enclosures added later with no permit and non-rated glazing
Original single-pane aluminum windows with failed seals, corroded tracks, and no opening protection
HVAC systems at or past twenty years, frequently with duct board plenums degrading in the attic
Well and septic systems on outlying lots with no recent service or water quality record
Seawall and canal bulkhead deterioration on saltwater canal lots — cap cracking, tieback failure, soil loss behind the wall

When to book wind mitigation inspections

If one of these applies to the Palm Coast property you are looking at, this is the inspection to order.

You have never submitted a wind mitigation form to your insurer
Your roof was replaced in the last few years and you never updated your carrier
Your last wind mitigation form is five years old or older and may have expired with your carrier
You installed impact windows, impact doors, or code-approved shutters and the premium never moved
You just closed on a home and are shopping carriers for the first time
Your home was built after 2002 and you suspect it already qualifies for credits nobody claimed
Your renewal premium jumped and you want every legitimate credit applied before you shop
You are getting quotes and want the same form in every carrier's hands so the comparison is apples to apples

Need wind mitigation inspections in Palm Coast?

Call 904-806-7679 and you get William Knight directly — the same person who will be on your roof and in your attic, and who writes the report afterward.

Mon–Sat 8am–6pm · 20+ years construction and renovation experience · InterNACHI certified, licensed and insured

Call 904-806-7679 Request an Inspection

What wind mitigation inspections covers

Wind mitigation is the implementation of certain building techniques in order to limit damage caused by intense wind. Florida has required insurers to offer discounts for these features since the legislation that followed Hurricane Andrew, and a wind mitigation inspection is simply the document that proves which of them your house actually has. What we look at: roof covering, roof deck attachment, roof-to-wall attachment, roof geometry, gable end bracing, wall construction type, secondary water barrier, and opening protection. The state form itself records seven of these categories; the others inform how the house is assessed. Beyond the premium discount, these are the features that determine whether you are exposed to a windstorm deductible that on many Florida policies runs well into five figures.

A wind mitigation inspection documents specific construction features that reduce hurricane damage, recorded on the Florida Office of Insurance Regulation's Uniform Mitigation Verification Inspection Form, OIR-B1-1802. It is not a condition inspection and it does not pass or fail a house. It is a factual survey of seven categories: building code compliance based on permit date, roof covering and its product approval, roof deck attachment, roof-to-wall attachment, roof geometry, secondary water resistance, and opening protection. Florida Statute 627.0629 requires residential property insurers to file actuarially reasonable discounts for construction features that reduce windstorm loss, which is why the form exists and why carriers accept it. The size of any credit varies by carrier, by policy, and by the specific features your home has. Nobody honest will quote you a dollar figure before the inspection.

Roof-to-wall attachment is usually the single largest line on the form, and it is the one homeowners understand least. The form distinguishes toe-nails, clips, single wraps, and double wraps, based on how the truss or rafter is fastened to the top plate. Toe-nails are just nails driven at an angle, common in older frame construction and worth the least. A clip is a metal connector that does not wrap over the top of the member. A single wrap goes over the top and down one side with the required number of nails; a double wrap goes down both sides. The gap in credit between toe-nails and wraps is significant. Getting this right means physically observing enough connections in the attic to support the classification, not guessing from the build year.

Secondary water resistance is the category most homes fail, and it is worth understanding why. SWR is a sealed roof deck: a self-adhering membrane or an approved foam application over the deck joints, installed underneath the roof covering so that if the shingles or tiles come off in a storm, water still does not enter the house. Because it lives under the covering, it cannot be added without tearing off the roof. That is the point most owners miss. If you are re-roofing anyway, the incremental cost of SWR, of a code-compliant deck nailing pattern, and of documented product approval for the covering is small relative to the tear-off you are already paying for, and it is the only moment those credits are practically available. Talk to your roofer about it before the contract is signed, not after.

Opening protection is scored on the weakest opening in the house, which surprises people who have spent money on shutters. Every glazed opening, including sliders, skylights, garage door glazing, and any opening the code treats as needing protection, has to be covered by a product with documented impact-rated approval to earn the strongest classification. One unprotected bathroom window or a plain garage door can drop the whole category. The form also separates hurricane-rated protection from basic wood structural panel protection, and the documentation matters: label photographs, notice of acceptance numbers, or Florida Product Approval numbers. If your shutters have no traceable approval, the credit may not hold up when the carrier reviews the form.

The form is generally accepted for up to five years, provided the structure has not materially changed and the information on it remains accurate. That gives you a natural cadence. Order a new one after a re-roof, after installing impact windows or shutters, after a garage door replacement, or when the existing form is aging out. We inspect the attic, measure and photograph deck fastener pattern and spacing where accessible, examine connectors at multiple locations, verify roof geometry against the actual footprint, and photograph every opening and its labeling. The completed form goes to you and, if you want, straight to your agent. Expect roughly forty-five minutes to an hour and a half on site depending on attic access and how many openings there are.

Two honest caveats. First, credits are not guaranteed and not uniform. Two homes with identical forms can see different outcomes because carriers weight the categories differently and because the credit is applied to the wind portion of the premium, which is a bigger share of the bill on the barrier islands than it is inland. Second, an inaccurate form helps nobody. Carriers re-inspect, and a form that overstates a feature can be reversed, with the credit clawed back. We report what we can actually observe and document, mark unknown where access genuinely prevents verification, and tell you what would need to happen to verify it properly.

How the inspection runs, step by step

Confirm what documentation exists
Before the visit, we look for a roof permit, a permit application date, or the original year of construction. The form's roof covering and roof deck sections depend on documented dates, and a permit number from the county building department is often what turns a 'no credit' answer into a credit.
Roof covering and building code compliance
We identify each roof covering type, record permit or original construction dates, and evaluate whether the covering meets Florida Building Code or Miami-Dade product approval requirements, along with its physical condition. A covering with visible damage or leaks affects the outcome.
Roof deck attachment and roof-to-wall connection
In the attic we document the weakest form of roof deck attachment — sheathing thickness, fastener type, and nail spacing at panel edges and field — and then the roof-to-wall connection: toe nails, clips, single wraps, or double wraps. These two sections carry heavy credit weight and are also where the form is most often filled out incorrectly by inspectors in a hurry.
Roof geometry and secondary water resistance
Roof geometry is measured, not eyeballed — hip credit requires the non-hip perimeter to be within the form's threshold, so we take the perimeter measurements and do the math. Secondary water resistance (a self-adhering underlayment or foam barrier over the deck seams) is verified in the attic, not assumed from a roofer's invoice.
Opening protection on every opening
Every window, door, garage door, skylight and glass block gets checked, because the form scores you on the weakest protected opening in the building. One unprotected bathroom window can cost you the entire opening protection credit. He documents product approval labels and impact ratings where they exist.
Signed OIR-B1-1802 emailed to you and your agent
You get the completed, signed form as a PDF with the supporting photographs the carrier requires, usually the same day or next morning. Send it to your agent and to every carrier you are quoting.

Plan on thirty to sixty minutes, including attic access. The report is the completed Florida OIR-B1-1802 form your insurer needs on file, which matters when you are working against a deadline — this is normally by owners at renewal, or by buyers before closing to price the policy. Same-week appointments are usually available across Palm Coast and the surrounding Flagler County.

Wind Mitigation Inspections cost in Palm Coast

A wind mitigation inspection in Palm Coast typically runs $100–$225 per inspection. Where a specific job lands depends on whether it's bundled with a 4-point or full home inspection on the same visit, which is materially cheaper, home size and the number of openings that have to be individually documented and attic accessibility — a low-clearance or inaccessible attic changes how deck attachment can be verified. We quote before we schedule, not after — you will know the number before the appointment goes on the calendar. Call 904-806-7679 and we can usually give you a figure on the phone.

Typical Northeast Florida range

$100–$225 per inspection

What moves an inspection within that range:

Whether it's bundled with a 4-point or full home inspection on the same visit, which is materially cheaper
Home size and the number of openings that have to be individually documented
Attic accessibility — a low-clearance or inaccessible attic changes how deck attachment can be verified
Travel distance, particularly to Palatka, Bunnell and outlying Putnam and Flagler addresses
Whether permit research is needed to establish roof covering and deck attachment dates
Report turnaround if you need it in hand for a same-day quote

That is a typical range, not a quote. Call 904-806-7679 for a firm price on your address.

Flagler County: permitting, wind, flood and insurance

Permit records for Palm Coast are held by Flagler County Building Division; the City of Palm Coast, City of Flagler Beach, and City of Bunnell each permit inside their own limits.

Flagler County permitting is genuinely split, and getting the jurisdiction right matters. The City of Palm Coast issues its own permits for the vast majority of the county's housing; Flagler Beach and Bunnell each run their own departments; and the Flagler County Building Division covers unincorporated areas. Re-roofs, window and door replacement, HVAC changeouts, water heaters, panel upgrades, seawall and dock work, additions, and pool enclosures all require permits. On Palm Coast homes we frequently find re-roofs and lanai enclosures done during the county's rapid growth years with no permit on file — worth resolving before closing. A wind mitigation inspection in Flagler County is worth pairing with a permit search at Flagler County Building Division; the City of Palm Coast, City of Flagler Beach, and City of Bunnell each permit inside their own limits, since unpermitted work is one of the few things an inspection cannot see directly.

Flagler County has adopted local wind speed lines by ordinance: a 130 mph ultimate design wind speed line for Risk Category II buildings and a 140 mph line for Risk Category III, with the boundaries described by specific roads and landmarks in the county code. For a typical single-family home — Risk Category II — the practical number in eastern Flagler is 130 mph. The Building Division confirms which side of the line a given parcel falls on. The wind-borne debris region in Flagler runs along the Atlantic — within one mile of the coastal mean high water line where Vult is 130 mph or greater. That covers Flagler Beach and the barrier island strip along A1A, where impact-rated windows and doors or approved shutters are required on all openings. Much of inland Palm Coast falls outside it, which is why so many 1980s ITT-era homes here have no opening protection at all and score zero on that line of the wind mitigation form.

Flagler's exposure is split between Atlantic surge and dune erosion on the Flagler Beach side — which has been severe and repeated in recent storms — and the Intracoastal and freshwater canal systems that thread through Palm Coast's C and F sections. Palm Coast's saltwater canal homes carry both tidal flood risk and seawall condition as a real inspection item.

Flagler carriers commonly ask for a 4-point inspection on older dwellings — roof, electrical, plumbing, HVAC. Requirements vary by carrier, so confirm with your insurance agent, your realtor, or your lender whether a 4-point is needed — we can include it with your inspection. On Palm Coast's original ITT-era housing stock, it is a common request on resales in the lettered sections. Wind mitigation on form OIR-B1-1802 is where money is made or lost: roof covering compliance with a current permit date, roof deck attachment, roof-to-wall connection, and roof shape carry the credits inland, and documented impact glazing or shutters add a large one on the Flagler Beach side. Keep that in mind when you decide how quickly to schedule.

Why this is worth doing properly

Credits your home already qualifies for get applied instead of quietly ignored
The photographs and measurements are done to the standard carriers actually accept, so the form doesn't bounce back
One form works across every carrier you shop, making quotes directly comparable
If a feature is missing, you learn exactly which upgrade would move the needle and which wouldn't
For a strongly built home, the credit typically recovers the cost of the inspection many times over in the first year

What Northeast Florida clients say

Published on the High Tide Inspections Google Business Profile.

5.0

68 Google reviews

View the Google profile

“William was professional and thorough. He was able to schedule the appointment within the timeline I needed and delivered the wind mitigation inspection report that same day. I would recommend High Tide Inspections for anyone needing his services.”
D Rappvia Google · July 2026
“William was extremely professional and thorough throughout the entire process. He was able to schedule the appointment within the timeline I needed and delivered both the 4-Point and full home inspection reports the following day.…”
Excerpt — Google truncates longer reviews in its listing. Read the full review on Google (opens in a new tab).
Christa Teddervia Google · May 2026
“As a Realtor, I really appreciated how thorough and professional High Tide Inspections was during this new construction inspection. William provided a detailed, easy-to-read report with great photos and clear explanations.…”
Excerpt — Google truncates longer reviews in its listing. Read the full review on Google (opens in a new tab).
Coral Babb · Realtorvia Google · May 2026

Reviews are published on the High Tide Inspections Google Business Profile and are reproduced here word for word. Rating and review count verified 2026-08-17.

Wind Mitigation Inspections in Palm Coast: common questions

How much does a wind mitigation inspections cost in Palm Coast?

Typically $100–$225 per inspection in Palm Coast. The variables are whether it's bundled with a 4-point or full home inspection on the same visit, which is materially cheaper, home size and the number of openings that have to be individually documented and attic accessibility — a low-clearance or inaccessible attic changes how deck attachment can be verified. Because Palm Coast is concrete block and stucco, high storm exposure, square footage and the number of systems in scope set the range. Call 904-806-7679 for a firm number before you book.

How long does a wind mitigation inspections take in Palm Coast?

Thirty to sixty minutes, including attic access. You get the completed Florida OIR-B1-1802 form your insurer needs on file. We schedule across Palm Coast and the rest of Flagler County, and same-week appointments are normally available.

What does a wind mitigation inspections find in Palm Coast homes?

Block-and-stucco holds up structurally far better than frame in a storm, and that fact quietly hides the real risk: everything attached to the block is what fails. The findings that repeat here are original or first-replacement roofs past twenty years, a frequent trigger for insurance non-renewal, stucco cracking at block control joints, corners, and lintels, with rust-jacking where lintel steel is corroding, aging electrical panels including obsolete brands, and undersized services on homes that added a pool or shop and lanai and porch enclosures added later with no permit and non-rated glazing. Roof first, every time.

Do I need a permit record for work found during a wind mitigation inspections in Palm Coast?

Permit history in Flagler County is held by Flagler County Building Division; the City of Palm Coast, City of Flagler Beach, and City of Bunnell each permit inside their own limits. An inspection tells you what condition something is in; the permit record tells you whether it was ever inspected by the jurisdiction. On additions, re-roofs, electrical upgrades and enclosed porches, checking both is worth the hour it takes.

Who performs the wind mitigation inspections in Palm Coast?

High Tide Inspections. We are InterNACHI certified, Florida licensed and insured, Certified Wind Mitigation Inspectors, Certified Roof Inspectors and 4-point certified, with 20+ years of construction and renovation experience behind the report. Call 904-806-7679.

How much will a wind mitigation inspection actually save me?

It depends entirely on what your home has, and no honest inspector will quote you a dollar figure in advance. Credits apply to the windstorm portion of your premium, which in coastal Northeast Florida is often a large share of the total bill. A home with a hip roof, code-compliant deck attachment, wrapped roof-to-wall connections and impact-rated openings can see a substantial reduction in that windstorm portion; a 1970s frame home with toe-nailed trusses and no opening protection may see little or nothing. The inspection tells you which one you are.

How much does a wind mitigation inspection cost?

Typically $100 to $225 as a standalone visit in Northeast Florida, and less when bundled with a 4-point or full home inspection on the same trip. Call 904-806-7679 and ask about the combination price.

What exactly does the OIR-B1-1802 form evaluate?

Seven items: building code compliance and roof covering, roof deck attachment, roof-to-wall attachment, roof geometry, secondary water resistance, opening protection, and the wall construction and structure type. Each answer maps to a credit schedule the carrier applies against the windstorm portion of your premium.

How long is a wind mitigation report good for?

Carriers generally accept the form for five years from the inspection date, though individual carriers set their own rules. It also becomes outdated the moment the home changes — a new roof, new impact windows or new shutters all warrant a fresh form, because those are exactly the changes that add credits.

How long does the inspection take?

Usually 45 minutes to an hour and a half. Most of the time goes to attic access for deck attachment and roof-to-wall verification, perimeter measurements for roof geometry, and walking every single opening. Rushing any of those three is how forms get filled out wrong.

Who does the work

When you call 904-806-7679 you are talking to the lead inspector, and when the report arrives it was written by the person who was standing in the attic.

William Knight, owner and chief inspector of High Tide Inspections

William Knight — Owner & Lead Inspector

Serving Northeast Florida from St. Augustine. Monday–Saturday, 8:00am–6:00pm.

Experienced inspectors, start to finish

The person who looks at the roof is the person who writes the report, and you can call and talk it through with us afterwards. Every inspection follows the InterNACHI Standards of Practice, so you know exactly what is covered.

InterNACHI certified, Florida licensed, insured

Certified Wind Mitigation Inspector and Certified Roof Inspector as well, which is what lets a single visit cover both the buyer's questions and the insurance carrier's forms.

20+ years construction and renovation experience

Two decades of building and renovating homes before inspecting them. That is the difference between noting a crack and telling you whether it matters, what caused it, and roughly what it takes to put right.

A detailed photo report, emailed quickly

Every finding is photographed and explained in plain language, organised so you can hand it straight to your agent, your carrier, or a contractor for pricing. No padding, no scare tactics, no upsell.