Skip to content
High Tide InspectionsHigh Tide Inspections
A two-storey Florida coastal townhome with balconies, shutters and a paver driveway

Jacksonville · Duval County

Condo Inspections in Jacksonville, FL

An inspection scoped to what you actually own inside a condominium unit, plus the shared components — envelope, balcony, common HVAC and plumbing — that drive assessments. We inspect your Jacksonville home and email a detailed photo report.

Mon–Sat 8am–6pm · InterNACHI certified, Florida licensed and insured · 20+ years construction and renovation experience

A condo inspection in Jacksonville covers the interior systems that are actually yours — HVAC, water heater, supply and drain lines, windows, sliders and the envelope where the unit meets common elements. It takes one to two hours depending on size and produces a report that separates unit responsibility from association responsibility. Typical cost runs $300–$675 per inspection. In Jacksonville this inspection tends to be ordered to settle a question — what is actually wrong, and what will it cost.

Typical cost
$300–$675per inspection
Building stock
Metro mixed-era
Permitting
Duval County

Condo Inspections in Jacksonville

Jacksonville is not one inspection market. Springfield and Riverside are turn-of-the-century frame and masonry with cast-iron drains. Arlington and Murray Hill are mid-century block with panels and wiring from an era that insurers now flag. Mandarin and Southside are slab-on-grade with polybutylene risk and aging first-generation systems. Bartram Park is production new-build. The right inspection depends entirely on what era you are buying into, and we adjust accordingly. What turns up on a condo inspection here is shaped by a building stock spanning a full century, so the era of the house dictates the failure modes before anything else does. We are InterNACHI certified, Florida licensed and insured, and we inspect every Jacksonville home to the same standard.

In Riverside, Avondale, and Springfield the two defects we find over and over are cast-iron drain lines corroding from the inside out — often not visibly leaking but with the wall thickness gone — and partial rewires that left knob-and-tube live in the attic. In 1960s and 1970s Arlington and Southside stock we check every branch circuit termination for aluminum wiring and every panel for Federal Pacific Stab-Lok or Zinsco. From roughly 1978 to 1995, polybutylene supply is the recurring insurance decline. Post-2000, the work moves to the attic: duct sealing, truss cuts, bath fan termination, and the stucco or siding band detail. On a condo inspections specifically, that means concentrating on the interior systems that are actually yours — HVAC, water heater, supply and drain lines, windows, sliders and the envelope where the unit meets common elements.

What we run into repeatedly in Jacksonville

Flooding here is river and creek driven. The St. Johns backs up on sustained onshore wind, and Trout River, Cedar Creek, Pottsburg Creek, and the Ortega River flood neighborhoods far from the ocean — San Marco and parts of Riverside included. Most of that housing predates flood mapping. The second challenge is permit history: converted garages, enclosed carports, finished attics, and added baths are everywhere in the older neighborhoods, and the Beaches cities permit separately from the City of Jacksonville, so a records search has to target the right jurisdiction. Third is insurance, where mainland homes almost never have opening protection because code never required it. Across Riverside, Avondale and San Marco, these are the patterns that repeat.

Neighborhoods and landmarks

We inspect throughout Jacksonville, including the areas around St. Johns River, Riverside Avondale Historic District, Memorial Park, Friendship Fountain, Jacksonville Zoo and Gardens, Cummer Museum of Art and Gardens, Kingsley Plantation. Median stock here runs 1900s–1930s in Springfield, Riverside, and Avondale; 1950s–1970s in Arlington, Murray Hill, and Ortega; 1980s–2020s Southside, Mandarin, and Northside.

  • Riverside
  • Avondale
  • San Marco
  • Springfield
  • Mandarin
  • Arlington
  • Ortega
  • Murray Hill
  • Northside
  • Southside
  • Bartram Park
  • Baymeadows

Mixed-era metropolitan building stock in Jacksonville

Jacksonville is not one housing market, it is about six of them stacked inside one city limit, and the inspection has to change with the address. A Riverside bungalow and a Bartram Park townhouse do not share a single failure mode. What they do share is that the expensive problems are almost always concealed: piping inside a slab or a wall, wiring behind a finished ceiling, framing under a floor. We sequence a metro inspection by era. If the house dates to the 1920s or 1930s, we are on drains and knob-and-tube. If it is 1965 to 1975, we are at the panel checking for aluminum branch wiring and Federal Pacific. If it is 1980 to 1995, we are chasing polybutylene and first-generation stucco details. Knowing the era tells you where to look first, and that is what 20+ years of construction and renovation experience buys a buyer.

What this building stock produces on a condo inspections

  • Cast-iron drain lines from roughly the 1920s through the 1970s corroding from the inside out and failing under slabs
  • Polybutylene supply piping in late-1970s through mid-1990s construction — a common insurance decline
  • Aluminum branch circuit wiring in mid-1960s to mid-1970s homes without approved AlumiConn or COPALUM repairs
  • Federal Pacific Stab-Lok and Zinsco or Sylvania-Zinsco panels still in service
  • Original 1920s–1940s framing with added HVAC and plumbing routed through cut structural members
  • Converted garages, enclosed carports, and finished attics with no permit history
  • Undersized or overfused electrical services on houses that have been added onto repeatedly
  • Gable-end bracing missing in mid-century homes, and roof decks nailed with staples or smooth-shank nails

When to book condo inspections

If one of these applies to the Jacksonville property you are looking at, this is the inspection to order.

  • You are buying a unit in a coastal or barrier island building where salt exposure is constant
  • The building is over 25 years old and you have not read a reserve study
  • You noticed staining on a ceiling, a balcony soffit, or around a slider track
  • The association's documents mention an upcoming assessment, milestone inspection or SIRS
  • The unit was renovated by a prior owner and you do not know if permits were pulled
  • You are buying an investment or rental unit sight-unseen
  • The unit's HVAC air handler is in a closet with no visible service history
  • You are buying a ground-floor or top-floor unit, which carry different water intrusion risks than the middle

Need condo inspections in Jacksonville?

Call 904-806-7679 and you get William Knight directly — the same person who will be on your roof and in your attic, and who writes the report afterward.

Mon–Sat 8am–6pm · 20+ years construction and renovation experience · InterNACHI certified, licensed and insured

What condo inspections covers

Inspecting a condominium is a different exercise from inspecting a house because you are not buying the whole building. You are buying an interior volume plus an undivided interest in everything else, and the boundary between the two is defined by the declaration of condominium, not by common sense. That document determines whether the window is yours, whether the air handler in the utility closet is yours, whether the balcony surface is yours or a limited common element you get exclusive use of but do not maintain, and where responsibility for a leak in the wall cavity actually lands. Read the declaration before the inspection if you can, and bring the questions to the walkthrough. It changes what the report needs to focus on.

Inside the unit, the inspection is a full inspection of everything within your boundary: the electrical from the unit panel through devices, the plumbing fixtures and any accessible supply and drain within the unit, the water heater, the HVAC equipment serving the unit including the condensate handling, the interior finishes, windows and doors, and any appliances included. Condo-specific findings recur with real consistency. Condensate from an air handler in an interior closet with a marginal drain line is the single most common source of unit-to-unit water damage in Florida multifamily. Failed shower pans and tub surrounds show up as ceiling staining in the unit below. Dryer vents routed through long shared chases collect lint and become a fire concern nobody owns.

Beyond your walls, the inspection can only report what is visible and accessible from common areas, and that limitation is real. Roof, structural elements, elevators, plumbing risers, building electrical service, waterproofing, and the exterior envelope belong to the association, and the association's own documents tell you far more about them than a walkthrough can. What we will document is what we can see and what it implies: staining and efflorescence on exterior walkways and balconies, spalling concrete with exposed rusting rebar, which is the classic salt-air failure on coastal buildings and is expensive to remediate, sealant failure at balcony-to-wall junctions and railing posts, ponding on flat surfaces, and corrosion on shared mechanical equipment.

Since Senate Bill 4-D was enacted in 2022 after the Champlain Towers South collapse, Florida condominium and cooperative associations have milestone inspection obligations for buildings three stories or more in height, generally required by December 31 of the year the building reaches 30 years of age based on the certificate of occupancy date, and every ten years thereafter. A 25-year trigger applies to buildings within three miles of the coastline under the original law, though HB 1021 in 2024 modified that so the earlier timeline is applied at the local enforcement agency's determination based on environmental conditions rather than automatically statewide. Associations for buildings of three or more habitable stories are also required to obtain a Structural Integrity Reserve Study covering specified structural components.

Those requirements have made document review the most financially important part of a condo purchase, and it is not something a home inspector performs. Ask for the milestone inspection report if the building is old enough to have one, the SIRS, the last two years of board meeting minutes, the current budget and reserve balances, the association's insurance declarations, and any notice of special assessment adopted or under discussion. Reserve underfunding and deferred structural work convert into special assessments that can dwarf anything in an inspection report. A unit can be in flawless condition and still be a bad purchase because the building has a seven-figure concrete restoration ahead of it. Your inspection tells you about the unit. The documents tell you about the liability.

Practically, a condo inspection runs one and a half to three hours depending on unit size and how much common area is worth examining. Schedule building access with the association or property manager in advance, because many buildings restrict contractor and vendor access to weekday hours and some require advance notice for roof or mechanical room entry. Ask specifically whether the unit's HVAC is a self-contained system, a split system with a condenser on a balcony or roof, or a connection to a central chilled water loop, because that determines both what can be inspected and who pays when it fails. High-rise units with rooftop or remote equipment often mean the mechanical portion of the report has genuine access limits, which get stated plainly rather than glossed over.

How the inspection runs, step by step

  1. Clarify what you actually own

    Before the visit we identify the unit boundary. In most Florida condominium declarations the association owns the structure, roof and exterior, and you own from the unpainted drywall inward plus your interior systems. That line determines what's your repair bill and what's an assessment.

  2. Interior systems inspection

    Electrical panel or subpanel, receptacles and GFCI protection, supply and drain plumbing, water heater age and TPR valve and pan, air handler and condensate line, windows and sliders, floors, ceilings and walls, plus built-in appliances. Water heater pans and condensate overflow switches matter far more in a stacked building where your leak becomes someone else's ceiling.

  3. Balcony, slider and envelope check

    Balcony slab edges and railings for concrete spalling and rebar corrosion, slider and window frames for water staining and failed seals, exterior wall penetrations, and stucco condition where accessible. On barrier island buildings this is where salt-driven deterioration shows up first.

  4. Common element observation

    Where accessible from the unit and common areas, We document visible condition of the roof, corridors, stairwells, parking structure, garage ceilings and exterior walls. We do not inspect the association's systems in place of a milestone or structural engineering evaluation, but visible deterioration is worth knowing about before you close.

  5. Report emailed with photos

    PDF the same day or next morning, with findings clearly split into 'your responsibility' and 'likely association responsibility' so you can read it alongside the condo documents your agent sends.

Plan on one to two hours depending on size. The report is a report that separates unit responsibility from association responsibility, which matters when you are working against a deadline — this is normally during the inspection period, alongside a review of association documents. Same-week appointments are usually available across Jacksonville and the surrounding Duval County.

Condo Inspections cost in Jacksonville

A condo inspection in Jacksonville typically runs $300–$675 per inspection. Where a specific job lands depends on unit square footage and number of bedrooms and baths, age of the building and of the unit's original systems and whether the unit has an in-unit water heater and air handler or building-supplied service. We quote before we schedule, not after — you will know the number before the appointment goes on the calendar. Call 904-806-7679 and we can usually give you a figure on the phone.

Typical Northeast Florida range

$300–$675 per inspection

What moves an inspection within that range:

  • Unit square footage and number of bedrooms and baths
  • Age of the building and of the unit's original systems
  • Whether the unit has an in-unit water heater and air handler or building-supplied service
  • Balcony access and how much of the envelope is visible from the unit
  • Travel distance to the building, particularly barrier island and beachfront addresses
  • Add-ons such as a wind mitigation form for the unit, where the carrier will accept one

That is a typical range, not a quote. Call 904-806-7679 for a firm price on your address.

Duval County: permitting, wind, flood and insurance

Permit records for Jacksonville are held by City of Jacksonville Building Inspection Division (the Beaches cities and Baldwin run their own building departments).

Most of Duval County permits through the City of Jacksonville Building Inspection Division under the consolidated city-county government, but Jacksonville Beach, Neptune Beach, Atlantic Beach, and Baldwin maintain their own building departments — so a permit search has to be run against the right jurisdiction. Re-roofs, window and door replacements, HVAC and water heater changeouts, panel upgrades, additions, and enclosures all require permits. In older Jacksonville neighborhoods we regularly find converted garages, enclosed carports, and finished attics with no permit record. That is not automatically a deal-killer, but it is a real question for the buyer and for the next carrier. Permit history for this work is held by City of Jacksonville Building Inspection Division (the Beaches cities and Baldwin run their own building departments), and on a condo inspection that record is often the fastest way to date what you are looking at.

Duval County is one of the few places in Florida where the wind speed line is written into local ordinance rather than read off a map. For Risk Category II buildings, the ultimate design wind speed is 130 mph east of a demarcation line that runs up the middle of the St. Johns River to I-95 at the Fuller Warren Bridge and then north along I-95 to the county line, and 125 mph west of it. Two houses a few blocks apart can be designed to different numbers. The Florida Building Code puts a site in the wind-borne debris region when it is within one mile of the coastal mean high water line with Vult of 130 mph or greater, or anywhere Vult reaches 140 mph. In Duval that captures Jacksonville Beach, Neptune Beach, Atlantic Beach, and the oceanfront strip — where impact glazing or approved shutters are required on all openings. Most of inland Jacksonville falls outside it, which is exactly why so many mainland homes have unprotected openings and lose the opening-protection credit on a wind mitigation report.

Duval's flood story is river-driven as much as ocean-driven. The St. Johns backs up on a strong onshore wind, and the tidal creeks — Trout River, Cedar, Ortega, Pottsburg — flood neighborhoods well inland of the beach. San Marco, Riverside, and the Northside creek corridors all carry AE zone areas, and a good deal of that housing was built before flood mapping existed.

Insurers writing in Duval commonly ask for a 4-point inspection — roof, electrical, plumbing, HVAC. Requirements vary by carrier, so confirm with your insurance agent, your realtor, or your lender whether a 4-point is needed — we can include it with your inspection. Jacksonville's older housing stock trips 4-point underwriting rules constantly: cast-iron drain lines, polybutylene supply, aluminum branch wiring, and Federal Pacific or Zinsco panels are all common declines. A wind mitigation report on form OIR-B1-1802 documents roof shape, roof deck attachment, roof-to-wall connection, roof covering compliance, secondary water resistance, and opening protection. Roof deck nailing and roof-to-wall straps are usually where a Jacksonville house wins or loses credits. Which is why the report from a condo inspections here often ends up in front of an underwriter.

Why this is worth doing properly

  • You know which problems are your repair bill and which are the association's before you close
  • Visible envelope and balcony deterioration gives you a real question to put to the board or manager
  • Water heater, air handler and shutoff conditions get documented — the three things that flood units
  • You get a written baseline for a unit you may never have physically stood in
  • Photographed findings support a repair request or a price conversation just like any other inspection

What Northeast Florida clients say

Published on the High Tide Inspections Google Business Profile.

  • William was professional and thorough. He was able to schedule the appointment within the timeline I needed and delivered the wind mitigation inspection report that same day. I would recommend High Tide Inspections for anyone needing his services.

    D Rappvia Google ·
  • William was extremely professional and thorough throughout the entire process. He was able to schedule the appointment within the timeline I needed and delivered both the 4-Point and full home inspection reports the following day.

    Excerpt — Google truncates longer reviews in its listing. Read the full review on Google (opens in a new tab).

    Christa Teddervia Google ·
  • As a Realtor, I really appreciated how thorough and professional High Tide Inspections was during this new construction inspection. William provided a detailed, easy-to-read report with great photos and clear explanations.

    Excerpt — Google truncates longer reviews in its listing. Read the full review on Google (opens in a new tab).

    Coral Babb · Realtorvia Google ·

Reviews are published on the High Tide Inspections Google Business Profile and are reproduced here word for word. Rating and review count verified 2026-08-17.

Condo Inspections in Jacksonville: common questions

How much does a condo inspections cost in Jacksonville?

Typically $300–$675 per inspection in Jacksonville. The variables are unit square footage and number of bedrooms and baths, age of the building and of the unit's original systems and whether the unit has an in-unit water heater and air handler or building-supplied service. Because Jacksonville is mixed-era metropolitan building stock, the condition of the systems being inspected affects how long the visit takes. Call 904-806-7679 for a firm number before you book.

How long does a condo inspections take in Jacksonville?

One to two hours depending on size. You get a report that separates unit responsibility from association responsibility. We schedule across Jacksonville and the rest of Duval County, and same-week appointments are normally available.

What does a condo inspections find in Jacksonville homes?

Jacksonville is not one housing market, it is about six of them stacked inside one city limit, and the inspection has to change with the address. The findings that repeat here are cast-iron drain lines from roughly the 1920s through the 1970s corroding from the inside out and failing under slabs, polybutylene supply piping in late-1970s through mid-1990s construction — a common insurance decline, aluminum branch circuit wiring in mid-1960s to mid-1970s homes without approved alumiconn or copalum repairs and federal pacific stab-lok and zinsco or sylvania-zinsco panels still in service. In Riverside, Avondale, and Springfield the two defects we find over and over are cast-iron drain lines corroding from the inside out — often not visibly leaking but with the wall thickness gone — and partial rewires that left knob-and-tube live in the attic.

Do I need a permit record for work found during a condo inspections in Jacksonville?

Permit history in Duval County is held by City of Jacksonville Building Inspection Division (the Beaches cities and Baldwin run their own building departments). An inspection tells you what condition something is in; the permit record tells you whether it was ever inspected by the jurisdiction. On additions, re-roofs, electrical upgrades and enclosed porches, checking both is worth the hour it takes.

Who performs the condo inspections in Jacksonville?

High Tide Inspections. We are InterNACHI certified, Florida licensed and insured, Certified Wind Mitigation Inspectors, Certified Roof Inspectors and 4-point certified, with 20+ years of construction and renovation experience behind the report. Call 904-806-7679.

How much does a condo inspection cost?

Typically $300 to $675 in Northeast Florida, mostly driven by square footage. Small one-bedroom units sit at the low end; large multi-bedroom units in older buildings sit at the high end. Call 904-806-7679 with the unit size and building age for a firm number.

How long does a condo inspection take?

Usually one and a half to two and a half hours. Less exterior and no attic or crawl space means less ground to cover than a single-family home, but the interior systems get the same scrutiny and the balcony and envelope check adds time in older coastal buildings.

What does a condo inspection not cover?

It is not a substitute for the association's structural or milestone inspection, and it does not evaluate the building's reserves, elevators, fire suppression system, roof interior, or below-grade parking structure engineering. Those live in the association's documents and its own engineering reports — read both.

Do I need an inspection if the association maintains the exterior?

Yes. The association maintaining the roof does not mean the roof is in good shape, and a deteriorating building means special assessments you will pay. Separately, everything inside your unit — panel, plumbing, water heater, air handler, windows in many declarations — is entirely yours.

Can I get wind mitigation credits on a condo?

Sometimes. Unit owner HO-6 policies generally cover the interior and personal property, and the building's wind features are usually reflected in the association's master policy. Some carriers will apply opening-protection credits for impact-rated windows and doors on the unit. Ask your agent what your specific carrier accepts before ordering the form.

Who does the work

When you call 904-806-7679 you are talking to the lead inspector, and when the report arrives it was written by the person who was standing in the attic.

William Knight, owner and chief inspector of High Tide Inspections

William KnightOwner & Lead Inspector

Serving Northeast Florida from St. Augustine. Monday–Saturday, 8:00am–6:00pm.

  • InterNACHI Certified Professional Inspector
  • Certified Wind Mitigation Inspector
  • Certified Roof Inspector
  • InterNACHI Certified Four Point Inspector

Experienced inspectors, start to finish

The person who looks at the roof is the person who writes the report, and you can call and talk it through with us afterwards. Every inspection follows the InterNACHI Standards of Practice, so you know exactly what is covered.

InterNACHI certified, Florida licensed, insured

Certified Wind Mitigation Inspector and Certified Roof Inspector as well, which is what lets a single visit cover both the buyer's questions and the insurance carrier's forms.

20+ years construction and renovation experience

Two decades of building and renovating homes before inspecting them. That is the difference between noting a crack and telling you whether it matters, what caused it, and roughly what it takes to put right.

A detailed photo report, emailed quickly

Every finding is photographed and explained in plain language, organised so you can hand it straight to your agent, your carrier, or a contractor for pricing. No padding, no scare tactics, no upsell.

Schedule condo inspections in Jacksonville

Tell us the address and your closing date and we will give you a firm price and the first date we can be there.

Mon–Sat 8am–6pm · 20+ years construction and renovation experience · InterNACHI certified, licensed and insured

904-806-7679Request Inspection