
Flagler Beach · Flagler County
New Construction Inspections in Flagler Beach, FL
Independent phase inspections on a builder's home — pre-drywall, final walkthrough and the 11-month warranty inspection — performed for you, not for the builder. We inspect your Flagler Beach home and email a detailed photo report.
Mon–Sat 8am–6pm · InterNACHI certified, Florida licensed and insured · 20+ years construction and renovation experience
A new construction inspection in Flagler Beach covers framing and structural detail before drywall, mechanical rough-ins, and then the finished work against the builder's own standard at final walkthrough. It takes one to three hours per phase and produces a phase report you can hand the builder as a punch list. Typical cost runs $300–$675 per phase visit. In Flagler Beach this request comes with a deadline attached more often than not — a carrier needs the form, or an underwriter has flagged the file.
- Typical cost
- $300–$675per phase visit
- Building stock
- Coastal barrier
- Permitting
- Flagler County
New Construction Inspections in Flagler Beach
Flagler Beach is a small barrier island town that has taken repeated, well-documented storm damage — dune loss and A1A undermining in particular. That history shapes what matters in an inspection here: how the envelope is detailed, what got repaired after which storm, whether it was permitted, and whether the flood elevation on that specific lot is what the buyer thinks it is. Flagler Beach is defined by salt air, wind-borne debris exposure and the moisture detailing that coastal walls live or die on, and that is what a new construction inspection has to account for. We are InterNACHI certified, Florida licensed and insured, and we inspect every Flagler Beach home to the same standard.
Post-storm repair quality is the recurring theme. We look for roofs replaced under insurance claims — was there a permit, was the deck re-nailed, is the drip edge and roof edge detailing correct — because that determines both leak risk and wind mitigation credits. Salt corrosion is severe here: condenser coils, disconnects, panel bus, fasteners, and hurricane connectors all show it. Older cottages get checked for rusting lintels cracking stucco and for original wiring left behind a cosmetic remodel. Opening protection is required in the debris region, so we document exactly what is installed and whether it can be evidenced. On a new construction inspections specifically, that means concentrating on framing and structural detail before drywall, mechanical rough-ins, and then the finished work against the builder's own standard at final walkthrough.
What we run into repeatedly in Flagler Beach
Erosion and surge are not theoretical here — they are recent history, and they affect both dune-side property and the road itself. Flood zones on the island include VE and AE areas and older cottages sit well below current base flood elevation, which limits what can be done with them. Flagler Beach permits independently of Flagler County and the City of Palm Coast, so records searches must target the city. Insurance is tight: oceanfront exposure plus a roof past twenty years plus undocumented opening protection is the combination that gets a policy declined. Across Ocean Palm, Flagler Beach Historic downtown area and Eagle Rock Ranch, these are the patterns that repeat.
Neighborhoods and landmarks
We inspect throughout Flagler Beach, including the areas around Flagler Beach Pier, State Road A1A oceanfront, Gamble Rogers Memorial State Recreation Area, Bulow Creek State Park, Intracoastal Waterway. Median stock here runs 1950s–1970s original cottages, 1980s–1990s condo development, and continuing rebuild activity after recent storm seasons.
- Ocean Palm
- Flagler Beach Historic downtown area
- Eagle Rock Ranch
- Palma Vista
Coastal and barrier-island building stock in Flagler Beach
On a barrier island, the ocean is a testing lab running twenty-four hours a day. Salt aerosol carries several blocks inland and it attacks anything metal — condenser coils, fasteners, panel bus bars, hurricane connectors, railing anchors. A heat pump that lasts fifteen years three miles inland routinely gives out at eight to ten on the beach. On top of that, most of this area sits inside the Florida Building Code wind-borne debris region, so opening protection is not optional on new work and its presence or absence is one of the largest single line items on a wind mitigation report. The two questions we answer on every island inspection are: what is the true remaining life on the metal systems, and can this envelope actually be documented for insurance? Both change the number a buyer should be willing to pay.
What this building stock produces on a new construction inspections
- Corroded HVAC condenser coils, fan cages, and disconnect boxes — often at half of expected service life
- Rusted roof and wall fasteners, hurricane straps, and lintels showing rust-jacking through stucco
- Stucco-over-block cracking at corners and openings, with moisture intrusion behind the coating
- Missing, undocumented, or non-code-compliant opening protection in the wind-borne debris region
- Roof edge and drip edge detailing that will not hold in uplift, and lifted or creased shingle tabs
- Elevated foundations with corroded connectors, deteriorated pile jackets, or enclosed below-BFE space
- Salt-corroded electrical panels, breakers, and exterior receptacles on the ocean side of the house
- Deck, balcony, and railing attachments with rusted or undersized anchors
When to book new construction inspections
If one of these applies to the Flagler Beach property you are looking at, this is the inspection to order.
- Your home is framed and the drywall crew is scheduled — you have days, not weeks, to see behind the walls
- The builder told you a third-party inspection 'isn't necessary because the county inspects'
- You are approaching your closing walkthrough and the punch list is being written by the builder's own rep
- Month 10 of your one-year builder warranty is here and you have not had it independently inspected
- The subdivision went up fast with rotating subcontractor crews
- You noticed nail pops, sticking doors, or hairline cracks that appeared in the first few months
- Your HVAC seems to run constantly or certain rooms never cool the same as others
- There is standing water near the foundation or the grading slopes back toward the slab
Need new construction inspections in Flagler Beach?
Call 904-806-7679 and you get William Knight directly — the same person who will be on your roof and in your attic, and who writes the report afterward.
Mon–Sat 8am–6pm · 20+ years construction and renovation experience · InterNACHI certified, licensed and insured
What new construction inspections covers
Buying new does not mean buying defect-free. A house is assembled by a rotating sequence of subcontractors working against a schedule, inspected by a municipal building official against life-safety code rather than against workmanship, and handed over during a walkthrough that mostly catches paint scuffs and a sticking door. Independent inspection on a new build is not an accusation against the builder. It is a second set of eyes at the moments when problems are still cheap to fix. The best builders in Northeast Florida have no issue with it; some will even tell you which phase they would want inspected if it were their money. A builder who refuses to allow any third-party inspection has told you something useful.
The pre-drywall phase inspection is the one that cannot be replicated later, and it is the reason to engage an inspector early rather than at closing. Once drywall goes up, the framing, the structural connectors, the plumbing rough-in, the electrical rough-in, the HVAC duct runs, the fire blocking, the window and door flashing details, and the weather-resistive barrier all disappear behind a finished surface for the life of the house. This is the window to catch cut or notched structural members, missing or under-nailed hurricane connectors, ducts crushed against framing, drain lines with insufficient fall, plumbing penetrations left unsealed, and window flashing installed out of sequence so it directs water into the wall rather than out of it. Timing is tight. It happens between rough-in approval and insulation, usually a matter of days.
The final or pre-closing inspection is a full home inspection performed on a finished house, and it produces a punch list with photographs that you can hand to the builder before you sign. Typical findings on new construction in this region: HVAC systems that never got a proper airflow balance so the back bedrooms run five degrees warm, condensate lines run without adequate fall or without a float switch, bath fans terminating into the attic instead of through the roof, missing attic insulation over the garage ceiling or at the attic access hatch, reversed polarity and missing GFCI or AFCI protection at specific circuits, roof flashings and kick-outs omitted at wall junctions, grading that slopes toward the slab, and irrigation heads spraying directly onto stucco.
Then there is the inspection almost nobody books, and it is the most valuable one on the list. Most builder warranties are tiered: roughly one year on workmanship and materials, two years on the electrical, plumbing, and HVAC distribution systems, and ten years on major structural defects. The one-year workmanship coverage is the broad one, and it is the one that expires while you are still unpacking. An inspection at the eleven-month mark, scheduled with at least three to four weeks left before the anniversary date, gives you time to submit a documented claim list while the builder is still obligated to correct at no cost. Read your specific warranty document first, because terms and claim procedures vary by builder.
What an eleven-month inspection finds is different from what the final walkthrough found, because the house has now been through a full Florida seasonal cycle. Materials have moved. Settlement has occurred. The slab has cured. The HVAC has run through a full summer at design load. Typical findings: drywall cracking at corners and above openings, nail pops, doors that no longer latch as framing shrank, grout and caulk failures at tub and shower junctions, exterior stucco cracking at control joints and window corners, roof shingle sealant that never bonded, condensate drainage problems that only show under sustained load, water heater and expansion tank issues, and grading and drainage failures that only appear after the landscaping has settled and the first heavy rain season has passed.
Practically, book the pre-drywall phase as soon as you have a framing completion date, and ask your builder's superintendent to notify you when rough-in inspections are approved so the visit lands in the right window. Book the final for a few days before your scheduled closing, not the morning of, so there is time for the builder to correct items. Book the warranty inspection at month ten to eleven and put the date in your calendar the day you close, because it is the single easiest inspection to forget and the one that costs the most to miss. Reports on all three come with photographs and are written so they can be handed directly to a builder's warranty department without translation.
How the inspection runs, step by step
Pre-drywall inspection
Scheduled after framing, rough electrical, rough plumbing and mechanical rough-in but before insulation and drywall. We document framing and truss connections, hurricane strapping and roof-to-wall hardware, notched or drilled structural members, plumbing supply and drain runs, ducts, window and door flashing, and the weather-resistive barrier. This is the only day these things are ever visible.
Pre-closing / final walkthrough inspection
Done shortly before your walkthrough with the builder. Full systems check — HVAC temperature split, every receptacle and GFCI, every window and door, grading and drainage, roof and flashing, attic insulation coverage and depth, appliances and fixtures — plus the cosmetic punch items builders routinely miss.
Documented punch list you can hand over
You get a photographed, itemized list organized so the builder's warranty department can act on it. Location, photo, description. Vague complaints get argued; documented items get fixed.
11-month warranty inspection
Scheduled in month 10 or 11 of a standard one-year builder warranty, deliberately early enough that you can submit claims before it expires. By this point the house has been through a full Florida summer and a settling cycle, and the defects that were invisible at closing have surfaced.
Report emailed with photos and priorities
PDF by email, same day or next morning, separated into warranty-claimable defects and normal owner maintenance so you are not burning credibility with the builder on items they'll rightly decline.
Follow-up verification if you want it
After the builder completes warranty work, we can return and confirm the items were actually corrected rather than closed out on paper.
Plan on one to three hours per phase. The report is a phase report you can hand the builder as a punch list, which matters when scheduled at pre-drywall and again before closing, and again before the one-year warranty expires. Same-week appointments are usually available across Flagler Beach and the surrounding Flagler County.
New Construction Inspections cost in Flagler Beach
A new construction inspection in Flagler Beach typically runs $300–$675 per phase visit. Where a specific job lands depends on which phase — pre-drywall, pre-closing and 11-month are each priced separately, square footage and number of stories and whether you book multiple phases together, which is priced better than one-offs. We quote before we schedule, not after — you will know the number before the appointment goes on the calendar. Call 904-806-7679 and we can usually give you a figure on the phone.
Typical Northeast Florida range
$300–$675 per phase visit
What moves an inspection within that range:
- Which phase — pre-drywall, pre-closing and 11-month are each priced separately
- Square footage and number of stories
- Whether you book multiple phases together, which is priced better than one-offs
- Travel to outlying subdivisions in Nocatee, Middleburg, Palm Coast and similar growth corridors
- Site access and scheduling constraints when the builder controls the calendar
- Optional return visit to verify completed warranty repairs
That is a typical range, not a quote. Call 904-806-7679 for a firm price on your address.
Flagler County: permitting, wind, flood and insurance
Permit records for Flagler Beach are held by Flagler County Building Division; the City of Palm Coast, City of Flagler Beach, and City of Bunnell each permit inside their own limits.
Flagler County permitting is genuinely split, and getting the jurisdiction right matters. The City of Palm Coast issues its own permits for the vast majority of the county's housing; Flagler Beach and Bunnell each run their own departments; and the Flagler County Building Division covers unincorporated areas. Re-roofs, window and door replacement, HVAC changeouts, water heaters, panel upgrades, seawall and dock work, additions, and pool enclosures all require permits. On Palm Coast homes we frequently find re-roofs and lanai enclosures done during the county's rapid growth years with no permit on file — worth resolving before closing. Flagler County routes permitting through Flagler County Building Division; the City of Palm Coast, City of Flagler Beach, and City of Bunnell each permit inside their own limits; pulling that history alongside a new construction inspection tells you whether past work was inspected or not.
Flagler County has adopted local wind speed lines by ordinance: a 130 mph ultimate design wind speed line for Risk Category II buildings and a 140 mph line for Risk Category III, with the boundaries described by specific roads and landmarks in the county code. For a typical single-family home — Risk Category II — the practical number in eastern Flagler is 130 mph. The Building Division confirms which side of the line a given parcel falls on. The wind-borne debris region in Flagler runs along the Atlantic — within one mile of the coastal mean high water line where Vult is 130 mph or greater. That covers Flagler Beach and the barrier island strip along A1A, where impact-rated windows and doors or approved shutters are required on all openings. Much of inland Palm Coast falls outside it, which is why so many 1980s ITT-era homes here have no opening protection at all and score zero on that line of the wind mitigation form.
Flagler's exposure is split between Atlantic surge and dune erosion on the Flagler Beach side — which has been severe and repeated in recent storms — and the Intracoastal and freshwater canal systems that thread through Palm Coast's C and F sections. Palm Coast's saltwater canal homes carry both tidal flood risk and seawall condition as a real inspection item.
Flagler carriers commonly ask for a 4-point inspection on older dwellings — roof, electrical, plumbing, HVAC. Requirements vary by carrier, so confirm with your insurance agent, your realtor, or your lender whether a 4-point is needed — we can include it with your inspection. On Palm Coast's original ITT-era housing stock, it is a common request on resales in the lettered sections. Wind mitigation on form OIR-B1-1802 is where money is made or lost: roof covering compliance with a current permit date, roof deck attachment, roof-to-wall connection, and roof shape carry the credits inland, and documented impact glazing or shutters add a large one on the Flagler Beach side. Which is why the report from a new construction inspections here often ends up in front of an underwriter.
Why this is worth doing properly
- Framing, strapping, flashing and rough-ins get looked at while they are still visible and cheap to fix
- Your punch list is written by someone with no relationship to the builder
- The 11-month inspection catches settling, HVAC and drainage defects while the builder still owes you the repair
- Photographed documentation makes warranty claims far harder to dismiss
- You learn your new house — shutoffs, panel, equipment, filter sizes — from someone explaining it plainly
What Northeast Florida clients say
Published on the High Tide Inspections Google Business Profile.
“William was professional and thorough. He was able to schedule the appointment within the timeline I needed and delivered the wind mitigation inspection report that same day. I would recommend High Tide Inspections for anyone needing his services.”
D Rappvia Google · “William was extremely professional and thorough throughout the entire process. He was able to schedule the appointment within the timeline I needed and delivered both the 4-Point and full home inspection reports the following day.…”
Excerpt — Google truncates longer reviews in its listing. Read the full review on Google (opens in a new tab).
Christa Teddervia Google · “As a Realtor, I really appreciated how thorough and professional High Tide Inspections was during this new construction inspection. William provided a detailed, easy-to-read report with great photos and clear explanations.…”
Excerpt — Google truncates longer reviews in its listing. Read the full review on Google (opens in a new tab).
Coral Babb · Realtorvia Google ·
Reviews are published on the High Tide Inspections Google Business Profile and are reproduced here word for word. Rating and review count verified 2026-08-17.
New Construction Inspections in Flagler Beach: common questions
How much does a new construction inspections cost in Flagler Beach?
Typically $300–$675 per phase visit in Flagler Beach. The variables are which phase — pre-drywall, pre-closing and 11-month are each priced separately, square footage and number of stories and whether you book multiple phases together, which is priced better than one-offs. Because Flagler Beach is coastal and barrier-island building stock, the condition of the systems being inspected affects how long the visit takes. Call 904-806-7679 for a firm number before you book.
How long does a new construction inspections take in Flagler Beach?
One to three hours per phase. You get a phase report you can hand the builder as a punch list. We schedule across Flagler Beach and the rest of Flagler County, and same-week appointments are normally available.
What does a new construction inspections find in Flagler Beach homes?
On a barrier island, the ocean is a testing lab running twenty-four hours a day. The findings that repeat here are corroded hvac condenser coils, fan cages, and disconnect boxes — often at half of expected service life, rusted roof and wall fasteners, hurricane straps, and lintels showing rust-jacking through stucco, stucco-over-block cracking at corners and openings, with moisture intrusion behind the coating and missing, undocumented, or non-code-compliant opening protection in the wind-borne debris region. Post-storm repair quality is the recurring theme.
Do I need a permit record for work found during a new construction inspections in Flagler Beach?
Permit history in Flagler County is held by Flagler County Building Division; the City of Palm Coast, City of Flagler Beach, and City of Bunnell each permit inside their own limits. An inspection tells you what condition something is in; the permit record tells you whether it was ever inspected by the jurisdiction. On additions, re-roofs, electrical upgrades and enclosed porches, checking both is worth the hour it takes.
Who performs the new construction inspections in Flagler Beach?
High Tide Inspections. We are InterNACHI certified, Florida licensed and insured, Certified Wind Mitigation Inspectors, Certified Roof Inspectors and 4-point certified, with 20+ years of construction and renovation experience behind the report. Call 904-806-7679.
Why inspect a brand new home that already passed county inspection?
Because a municipal inspection verifies minimum code compliance on specific items, often in a matter of minutes, and it does not evaluate workmanship, installation quality, or whether the system will actually perform. New homes routinely have missing insulation, disconnected or crushed ducts, improper flashing, uncorrected framing cuts and drainage that slopes the wrong way. None of that fails a code inspection.
How much does a new construction inspection cost?
Typically $300 to $675 per phase visit in Northeast Florida, driven mostly by square footage. Booking pre-drywall and pre-closing together is priced better than two separate calls. Ask about the package when you call 904-806-7679.
When exactly should I schedule the pre-drywall inspection?
After framing, roof dry-in, and rough electrical, plumbing and mechanical are complete, but before insulation goes in. That window is often only a few days long. Ask your superintendent for the drywall date the week framing finishes, and call as soon as you have it.
Can my builder refuse to let a third-party inspector on site?
Some builders push back or require you to be present, and a few restrict site access for liability reasons during active construction. Most in Northeast Florida will accommodate a scheduled inspection. Read your purchase agreement early — if there is a restriction, you want to know in month one, not the week drywall goes up.
What is an 11-month warranty inspection and why that month?
Most builder warranties on workmanship run one year from closing. Inspecting in month 10 or 11 gives you time to write up findings and submit a claim before the warranty expires. Inspect at month 12 and you have documentation for a warranty you no longer have.
Who does the work
When you call 904-806-7679 you are talking to the lead inspector, and when the report arrives it was written by the person who was standing in the attic.

William Knight — Owner & Lead Inspector
Serving Northeast Florida from St. Augustine. Monday–Saturday, 8:00am–6:00pm.
Experienced inspectors, start to finish
The person who looks at the roof is the person who writes the report, and you can call and talk it through with us afterwards. Every inspection follows the InterNACHI Standards of Practice, so you know exactly what is covered.
InterNACHI certified, Florida licensed, insured
Certified Wind Mitigation Inspector and Certified Roof Inspector as well, which is what lets a single visit cover both the buyer's questions and the insurance carrier's forms.
20+ years construction and renovation experience
Two decades of building and renovating homes before inspecting them. That is the difference between noting a crack and telling you whether it matters, what caused it, and roughly what it takes to put right.
A detailed photo report, emailed quickly
Every finding is photographed and explained in plain language, organised so you can hand it straight to your agent, your carrier, or a contractor for pricing. No padding, no scare tactics, no upsell.
Other inspections in Flagler Beach
We cover the full range of inspection work in Flagler Beach and across Flagler County.
New Construction Inspections in nearby areas
The same inspection in neighbouring Northeast Florida communities.
Related inspections
- Home InspectionsA full, non-invasive evaluation of the home's structure, roof, electrical, plumbing, HVAC, exterior, attic and interior, documented with photos in a PDF report emailed the same day or next morning.
- Wind Mitigation InspectionsThe Florida OIR-B1-1802 Uniform Mitigation Verification Inspection — documenting the seven construction features carriers use to apply windstorm premium credits.
- Home Warranty InspectionsA condition inspection timed to a builder warranty deadline or a home warranty policy period, documenting covered defects while someone else is still contractually responsible for them.
- Foundation InspectionsA focused evaluation of slab, stem wall, block or pier foundations — crack patterns, movement, floor level, drainage and the site conditions actually causing the problem.
Looking for something else? See all home inspections in Flagler Beach, the New Construction Inspections overview, or browse every service area.
Schedule new construction inspections in Flagler Beach
Tell us the address and your closing date and we will give you a firm price and the first date we can be there.
Mon–Sat 8am–6pm · 20+ years construction and renovation experience · InterNACHI certified, licensed and insured




